Solar · Error codes · Tigo Energy
IE013Tigo Energy · Tigo EI Inverter (EU)
IE013 on a Tigo Energy Tigo EI Inverter: Isolation Fault (Insulation Fault). Tigo suggestion: Wait; check wire insulation for damage
Short answer
On a Tigo Energy inverter, IE013 means: Isolation Fault (Insulation Fault). Tigo suggestion: Wait; check wire insulation for damage. The inverter stops until the fault clears or is reset.
Reviewed 24 September 2026 · 1 source
What it means
The manual says: Isolation Fault (Insulation Fault). Tigo suggestion: Wait; check wire insulation for damage.
Likely causes:
- Insulation Fault.
Is it safe?
| Does the inverter stop? | Yes |
|---|---|
| Severity | Fault — clears by itself when the condition goes |
The inverter stops until the fault clears or is reset.
Resetting itself: yes.
Manual reset: unknown.
What you can check
- Read the code on the inverter display / EI app.
- Consult your installer (Tigo: only qualified people should perform the listed actions).
What the engineer will check
- Wait; check wire insulation for damage.
- Escalate to Tigo Support if persists.
Who to ask for: PV / hybrid inverter.
Certification: MCS PV installer; Tigo-trained installer; electrical work to BS 7671.
What you might notice
Sources
- EI Inverter (EU) - Fault, Warning and Error Codes ↗ · Reviewed 24 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 24 September 2026