IE002 on a Tigo Energy Tigo EI Inverter: Grid Lost Fault (Grid Lost Fault). Tigo suggestion: Wait for power to return; check grid voltage in range; (detailed article: inverter POWER blue LED off; check AC breaker and main breaker on)
Short answer
On a Tigo Energy inverter, IE002 means: Grid Lost Fault (Grid Lost Fault). Tigo suggestion: Wait for power to return; check grid voltage in range; (detailed article: inverter POWER blue LED off; check AC breaker and main breaker on). The inverter stops until the fault clears or is reset.
Reviewed 24 September 2026 · 1 source
What it means
The manual says: Grid Lost Fault (Grid Lost Fault). Tigo suggestion: Wait for power to return; check grid voltage in range; (detailed article: inverter POWER blue LED off; check AC breaker and main breaker on).
Likely causes:
- Grid Lost Fault.
Is it safe?
| Does the inverter stop? | Yes |
|---|---|
| Severity | Fault — clears by itself when the condition goes |
The inverter stops until the fault clears or is reset.
Resetting itself: yes.
Manual reset: unknown.
What you can check
- Read the code on the inverter display / EI app.
- Consult your installer (Tigo: only qualified people should perform the listed actions).
- Check the AC isolator and consumer-unit breaker are on and whether there is a local power cut.
What the engineer will check
- Wait for power to return; check grid voltage in range; (detailed article: inverter POWER blue LED off; check AC breaker and main breaker on).
- Escalate to Tigo Support if persists.
Who to ask for: PV / hybrid inverter.
Certification: MCS PV installer; Tigo-trained installer; electrical work to BS 7671.
What you might notice
Sources
- EI Inverter (EU) - Fault, Warning and Error Codes ↗ · Reviewed 24 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 24 September 2026