Solar · Error codes · SolaX Power
Fan FaultSolaX Power · SolaX X1-Hybrid G3
Fan Fault on a SolaX Power SolaX X1-Hybrid G3: Fan Fault
Short answer
On a SolaX Power inverter, Fan Fault means: Fan Fault. The inverter keeps running. An engineer is needed to fix the cause.
Reviewed 24 September 2026 · 1 source
What it means
The manual says: Fan Fault.
Part involved: Cooling fan.
Likely causes:
- As described in manual.
Is it safe?
| Does the inverter stop? | No |
|---|---|
| Severity | Warning |
| Engineer needed? | Yes |
The inverter keeps running.
Resetting itself: no.
Manual reset: fan cleaning/replacement.
What you can check
- Read and note the exact code and time from the inverter display or app (screenshot).
- Check nothing is blocking the inverter's vents (look only).
- Where the SolaX manual says 'press the ESC key to restart the inverter', a homeowner can do that on the display. Steps that say 'disconnect PV+/PV-/battery' are for the installer only.
What the engineer will check
- Clean or replace fan.
Who to ask for: PV installer.
Certification: Electrician competent in grid-connected PV (BS 7671 Section 712; IET Code of Practice for Grid-connected Solar PV), ideally the original MCS-certified PV installer; brand-approved/trained installer to keep manufacturer warranty.
What you might notice
Sources
- X1-Hybrid G3 User Manual (EN) ↗ · page PDF p.34-35 · Reviewed 24 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 24 September 2026