Solar · Error codes · Shenzhen SOFARSOLAR Co., Ltd.
ID110Shenzhen SOFARSOLAR Co., Ltd. · SOFAR HYD 3000-6000-EP
ID110 on a Shenzhen SOFARSOLAR Co., Ltd. SOFAR HYD 3000-6000-EP: Overload protection 1
Short answer
On a Shenzhen SOFARSOLAR Co., Ltd. inverter, ID110 means: Overload protection 1. The inverter keeps running with some functions stopped. An engineer is needed to fix the cause.
Reviewed 24 September 2026 · 1 source
What it means
The manual says: Overload protection 1.
Part involved: Overload1.
Likely causes:
- Check whether inverter is operating under overload.
Is it safe?
| Does the inverter stop? | Partly |
|---|---|
| Engineer needed? | Yes |
The inverter keeps running with some functions stopped.
Resetting itself: unknown.
Manual reset: See checks.
What you can check
- Read the ID code and name on the inverter LCD (Event List) or in the SOFAR/SolarMAN app and note it for your installer.
- Reduce loads on the backup circuit.
What the engineer will check
- Check loads vs rating (ID111, ID112 same).
Who to ask for: Sofar-trained PV/battery installer.
Certification: Qualified electrician (BS 7671; MCS-certified PV installer for work on the PV array/DC side).
What you might notice
Sources
- HYD 3000/5000/6000-EP User Manual ↗ · sofarsolar.com upload 2024-12-27 · page 88 · Reviewed 24 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 24 September 2026