SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Viessmann
I.113Viessmann · One Base

I.113 on a Viessmann One Base: SmartGrid forced shutdown active

Short answer

On a Viessmann heat pump, I.113 means: SmartGrid forced shutdown active. The manual does not say whether the heat pump stops.

Reviewed 23 September 2026 · 1 source

What it means

The manual says: SmartGrid forced shutdown active.

Part involved: SmartGrid forced shutdown active.

When it shows: System characteristics: Power-OFF or output restriction via Smart Grid active.

Likely causes:

  • Power-OFF or output restriction via Smart Grid active.

Is it safe?

Does the heat pump stop?Not stated
SeverityInformation only
Engineer needed?No

The manual does not say whether the heat pump stops.

Resetting itself: Not stated per code in Viessmann document 6199893 GB 01/2026 (VSA00009).

Manual reset: User may acknowledge via HMI after noting the code (6249162 p.57); the message returns if the cause persists.

What you can check

  • On the HMI, tap the message and "?" to read the system characteristics and Viessmann's user tips; note the code (e.g. F.xxx) and text for your contractor (operating instructions 6249162 p.57).
  • Acknowledge the message once via the HMI; do not acknowledge fault messages several times in quick succession (6249162 p.58) - notify your contractor.
  • Check the heat pump breaker/isolator in the consumer unit is ON (do not repeatedly reset a breaker or RCD that keeps tripping).

What the engineer will check

  • See Viessmann service instructions.

Who to ask for: Viessmann-trained heat pump engineer / qualified electrician.

Certification: Qualified electrician for work on electrical equipment (Viessmann safety instructions).

What you might notice

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026