SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Viessmann
F.616Viessmann · One Base

F.616 on a Viessmann One Base: Incompatible software version in controller group recognised

Short answer

On a Viessmann heat pump, F.616 means: Incompatible software version in controller group recognised. The manual does not say whether the heat pump stops. An engineer is needed to fix the cause.

Reviewed 23 September 2026 · 1 source

What it means

The manual says: Incompatible software version in controller group recognised.

Part involved: Incompatible software version in controller group recognised.

When it shows: System characteristics: No demand going to outdoor unit.

Likely causes:

  • Software versions of the HPMU and VCMU electronics modules are not compatible.

Is it safe?

Does the heat pump stop?Not stated
Engineer needed?Yes

The manual does not say whether the heat pump stops.

Resetting itself: Not stated per code in Viessmann document 6199893 GB 01/2026 (VSA00009).

Manual reset: User may acknowledge via HMI after noting the code (6249162 p.57); the message returns if the cause persists.

What you can check

  • On the HMI, tap the message and "?" to read the system characteristics and Viessmann's user tips; note the code (e.g. F.xxx) and text for your contractor (operating instructions 6249162 p.57).
  • Acknowledge the message once via the HMI; do not acknowledge fault messages several times in quick succession (6249162 p.58) - notify your contractor.

What the engineer will check

  • Update software version of electronics modules via ViGuide.
  • Compare the software versions of the HPMU and VCMU electronics modules.
  • Have the identification number read out and checked by the manufacturer's technical support.

Who to ask for: Viessmann-trained heat pump installer/service engineer.

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026