J6-36 on a Daikin Altherma: OU: Malfunction of injection thermistor
Short answer
On a Daikin heat pump, J6-36 means: OU: Malfunction of injection thermistor. The heat pump stops until the fault clears or is reset. An engineer is needed to fix the cause.
Reviewed 23 September 2026 · 1 source
What it means
The manual says: OU: Malfunction of injection thermistor.
Part involved: thermistor / pressure sensor.
When it shows: Outdoor injection thermistor input is out of range.
Is it safe?
| Does the heat pump stop? | Yes |
|---|---|
| Severity | Fault — clears by itself when the condition goes |
| Engineer needed? | Yes |
The heat pump stops until the fault clears or is reset.
Resetting itself: yes.
Manual reset: Automatic when input is within range.
What you can check
- Read the full error code and sub-code shown on the user interface (Malfunctioning screen; press the help button for Daikin's long description) and note it, with the date/time, for your installer.
- Daikin documents this code as resetting automatically once the condition clears; if it keeps coming back, contact your installer.
- Do NOT bleed radiators while an error/malfunction symbol is displayed: Daikin operation manuals warn refrigerant may have leaked into the water circuit - ventilate and call your installer.
- If heating/hot water has stopped, the operation manual lets the user confirm on the Malfunctioning screen whether the backup/booster heater may take over as emergency heating (much higher running cost) until the installer attends.
What the engineer will check
- See Daikin service manual for this generation (not public).
Who to ask for: Heat pump engineer (Daikin-trained).
Certification: Electrical competence to BS 7671 for sensor/PCB wiring; F-gas if a refrigerant-side sensor must be replaced.
What you might notice
What owners and engineers report
9 owner and engineer reports mention this.
- No heating on the Altherma: 7 reports
- Intermittent fault on the Altherma: 2 reports
Sources
- Installer reference guide Daikin Altherma 3 H MT F EPRA08-12E + ETVH12UE6V (4P644482-1) ↗ · 4P644482-1 · page 256 · Reviewed 23 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 23 September 2026