Solar · Error codes
Which SolaX errors can I reset myself?
Short answer
On an X1-Hybrid G4, grid codes (IE 02, 03, 04, 08) clear themselves once the grid is normal. For overloads such as IE 16 or IE 17, the manual lets you switch off heavy loads and press ESC. Isolation (IE 13), RCD (IE 27), PV voltage (IE 05) and all BE battery codes need an installer.
Last checked 24 September 2026 · 1 source
In more detail
- Never do the 'disconnect PV+/PV-' steps yourself.
- BE codes come from the Triple Power battery BMS.
- X1-Mini/Boost G4 use IE:000nn format; G3 shows names only.
The facts, dated
- 01SolaX X1-Hybrid G4 manual version — 3.0 (2024-08-08)
manufacturer · UK · checked 24 September 2026 · solaxpower.com
Sources
Last checked: 24 September 2026