6610 on a SMA Solar Technology AG Sunny Island 4.4M / 6.0H / 8.0H: Battery voltage is temporarily too high
Short answer
On a SMA Solar Technology AG battery, 6610 means: Battery voltage is temporarily too high. The manual does not say whether the battery stops. An engineer is needed to fix the cause.
Reviewed 24 September 2026 · 1 source
What it means
The manual says: Battery voltage is temporarily too high.
Part involved: Sunny Island battery inverter.
When it shows: Battery voltage is temporarily too high.
Likely causes:
- Ensure all DC sources correctly configured; SMA inverters set to stand-alone country data set.
Is it safe?
| Does the battery stop? | Not stated |
|---|---|
| Engineer needed? | Yes |
The manual does not say whether the battery stops.
Resetting itself: unknown.
Manual reset: Autostart after malfunction (limited number of attempts, then 10-minute wait) per SMA 14.1; some errors must be acknowledged via the user interface.
What you can check
- Read the event in the Sunny Island web interface / Sunny Portal and note it for your installer.
- Contact your installer - battery sensor/voltage issues need a qualified person.
What the engineer will check
- Check load profile vs Sunny Island rating, battery bank voltage/charge, temperature sensor wiring, fans; parameter changes via installer login.
Who to ask for: Battery / off-grid installer (SMA Sunny Island trained).
Certification: Qualified electrician competent in battery energy storage (IET Code of Practice for Electrical Energy Storage Systems); manufacturer-trained installer.
What you might notice
Sources
- Operating manual SUNNY ISLAND 4.4M/6.0H/8.0H ↗ · SI44M-80H-13-BE-en-15 Version 1.5 · page 150 · Reviewed 24 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 24 September 2026