SolarpunkHomes
Sign inCall us · +44 7510 081687
Solar
Solar · Error codes · SMA Solar Technology AG
1411SMA Solar Technology AG · Sunny Island 4.4M / 6.0H / 8.0H

1411 on a SMA Solar Technology AG Sunny Island 4.4M / 6.0H / 8.0H: External current on a line conductor is greater than the permissible maximum current

Short answer

On a SMA Solar Technology AG inverter, 1411 means: External current on a line conductor is greater than the permissible maximum current. The inverter keeps running with some functions stopped. An engineer is needed to fix the cause.

Reviewed 24 September 2026 · 1 source

What it means

The manual says: External current on a line conductor is greater than the permissible maximum current.

Part involved: Sunny Island battery inverter.

When it shows: External current on a line conductor is greater than the permissible maximum current.

Likely causes:

  • Reduce power consumption of loads; reduce output of AC sources (e.g. PV inverter).

Is it safe?

Does the inverter stop?Partly
SeverityFault — clears by itself when the condition goes
Engineer needed?Yes

The inverter keeps running with some functions stopped.

Resetting itself: yes.

Manual reset: Autostart after malfunction (limited number of attempts, then 10-minute wait) per SMA 14.1; some errors must be acknowledged via the user interface.

What you can check

  • Read the event in the Sunny Island web interface / Sunny Portal and note it for your installer.
  • Switch off or stagger large appliances running on the backup/off-grid supply (e.g. kettle, oven, pumps), then see if the system recovers.

What the engineer will check

  • Check load profile vs Sunny Island rating, battery bank voltage/charge, temperature sensor wiring, fans; parameter changes via installer login.

Who to ask for: Battery / off-grid installer (SMA Sunny Island trained).

Certification: Qualified electrician competent in battery energy storage (IET Code of Practice for Electrical Energy Storage Systems); manufacturer-trained installer.

What you might notice

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 24 September 2026