SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Samsung
E470Samsung

E470 on a Samsung heat pump: Outdoor unit EEPROM Read/Write Error

Short answer

On a Samsung heat pump, E470 means: Outdoor unit EEPROM Read/Write Error. The heat pump stops until the fault clears or is reset. An engineer is needed to fix the cause. The wording differs by model range — each is shown below.

Reviewed 23 September 2026 · 2 sources

What it means

On the EHS Mono R32 (AE***RXYD*G)

The manual says: Outdoor unit EEPROM Read/Write Error.

Part involved: PCB EEPROM / data memory.

When it shows: Unit self-diagnosis: Outdoor unit EEPROM Read/Write Error.

Likely causes:

  • PCB memory (EEPROM/data flash) or option-setting data fault.
  • Engineer checks per Samsung service manual: Check outdoor unit EEPROM data loading; check PCB.

On the EHS Mono (RC***MHX*A, R410A)

The manual says: EEPROM read/write error.

Part involved: PCB EEPROM / data memory.

When it shows: Unit self-diagnosis: EEPROM read/write error.

Likely causes:

  • PCB memory (EEPROM/data flash) or option-setting data fault.
  • Engineer checks per Samsung service manual: Check outdoor unit EEPROM data loading; check PCB.

Is it safe?

Does the heat pump stop?Yes
Engineer needed?Yes

The heat pump stops until the fault clears or is reset.

Resetting itself: unknown.

Manual reset: unknown.

What you can check

  • Note the full error code shown on the controller; check the heat pump breaker/isolator in the consumer unit is ON; then contact your installer or Samsung service; Samsung manuals do not describe a homeowner reset for this code.

What the engineer will check

  • Check outdoor unit EEPROM data loading; check PCB. Any work inside casings, on PCBs, wiring, sensors, pumps, valves or refrigerant is engineer-only.

Who to ask for: Heat pump engineer (Samsung-trained, PCB diagnostics).

Certification: Competent electrical worker (BS 7671).

What you might notice

What owners and engineers report

7 owner and engineer reports mention this.

  • No heating on the EHS Mono R32 (AE***RXYD*G): 6 reports
  • Heat pump will not start on the EHS Mono R32 (AE***RXYD*G): 1 report

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026