SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Samsung
E590Samsung

E590 on a Samsung heat pump: [Inverter] Data flash Error

Short answer

On a Samsung heat pump, E590 means: [Inverter] Data flash Error. The heat pump stops until the fault clears or is reset. An engineer is needed to fix the cause. The wording differs by model range — each is shown below.

Reviewed 23 September 2026 · 2 sources

What it means

On the EHS Mono R290 (AE***CXYD*K and pump-integrated AE***CXYB*K)

The manual says: [Inverter] Data flash Error.

Part involved: PCB EEPROM / data memory.

When it shows: Unit self-diagnosis: [Inverter] Data flash Error.

Likely causes:

  • PCB memory (EEPROM/data flash) or option-setting data fault.
  • Engineer checks per Samsung service manual: Check inverter EEPROM data; check normal operation of PCB.

On the EHS Split R32 (AE***RXED*G)

The manual says: Inverter EEPROM Checksum error.

Part involved: PCB EEPROM / data memory.

When it shows: Unit self-diagnosis: Inverter EEPROM Checksum error.

Likely causes:

  • PCB memory (EEPROM/data flash) or option-setting data fault.
  • Engineer checks per Samsung service manual: Check inverter EEPROM data; check normal operation of PCB.

Is it safe?

Does the heat pump stop?Yes
Engineer needed?Yes

The heat pump stops until the fault clears or is reset.

Resetting itself: unknown.

Manual reset: unknown.

What you can check

  • Note the full error code shown on the controller; check the heat pump breaker/isolator in the consumer unit is ON; then contact your installer or Samsung service; Samsung manuals do not describe a homeowner reset for this code.

What the engineer will check

  • Check inverter EEPROM data; check normal operation of PCB. Any work inside casings, on PCBs, wiring, sensors, pumps, valves or refrigerant is engineer-only.

Who to ask for: Heat pump engineer (Samsung-trained, PCB diagnostics).

Certification: Competent electrical worker (BS 7671).

What you might notice

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026