SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Trianco
ALRM025Trianco · Activair Indoor R32 5/7kW (FG 9112 / FG 9113)

ALRM025 on a Trianco Activair Indoor R32 5/7kW: Plant exchanger antifreeze cooling operation

Short answer

On a Trianco heat pump, ALRM025 means: Plant exchanger antifreeze cooling operation. The manual does not say whether the heat pump stops. An engineer is needed to fix the cause.

Reviewed 23 September 2026 · 1 source

What it means

The manual says: Plant exchanger antifreeze cooling operation.

Part involved: ambient / water temperature protection logic.

When it shows: min(PT5, PT6) < PF23; restores > PF23 + PM1.

Likely causes:

  • Poor water circulation (air, partially closed valves, clogged sieve filter).
  • Delivery/return gradient outside 4-7C.

Is it safe?

Does the heat pump stop?Not stated
SeverityFault — clears by itself when the condition goes
Engineer needed?Yes

The manual does not say whether the heat pump stops.

Resetting itself: Generally automatic when the activation condition clears (conditions must persist e.g. 30 s).

Manual reset: If the alarm trips repeatedly (e.g. 3 times in 1 hour) it must be reset manually by the Technical Assistance Centre (press and hold the reset key until padlock and alarm symbol clear).

What you can check

  • Note the exact code shown on the controller (a photo helps) and report it to your installer or the manufacturer's service line.
  • Check the heat pump's supply breaker/isolator at the consumer unit is on (do not open any casing).
  • Check the outdoor unit is not blocked by snow, ice build-up or debris.
  • Leave the heat pump powered: frost protection needs a permanent electricity supply.

What the engineer will check

  • Check for: Poor water circulation (air, partially closed valves, clogged sieve filter).
  • Check for: Delivery/return gradient outside 4-7C.

Who to ask for: heating / hydraulics.

Certification: Competent heating engineer.

What you might notice

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026