SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Atlantic
ODU1-14FAtlantic

ODU1-14F on an Atlantic heat pump: Detection of compressor position error (permanent stoppage)

Short answer

On an Atlantic heat pump, ODU1-14F means: Detection of compressor position error (permanent stoppage). The heat pump stops until the fault clears or is reset. An engineer is needed to fix the cause. The wording differs by model range — each is shown below.

Reviewed 23 September 2026 · 2 sources

What it means

On the Alféa Excellia / Excellia Duo (R410A split, 11-16, pre-A.I.)

The manual says: Detection of compressor position error (permanent stoppage).

Likely causes:

  • Compressor start/position detection or motor control fault.

On the Alféa Hybrid Duo (heat pump + integrated fuel-oil boiler)

The manual says: The compressor does not work.

Likely causes:

  • Compressor start/position detection or motor control fault.

Is it safe?

On the Alféa Excellia / Excellia Duo (R410A split, 11-16, pre-A.I.)

Does the heat pump stop?Yes
SeveritySafety lockout
Engineer needed?Yes

The heat pump stops until the fault clears or is reset.

On the Alféa Hybrid Duo (heat pump + integrated fuel-oil boiler)

Does the heat pump stop?Yes
SeverityFault — clears by itself when the condition goes
Engineer needed?Yes

The heat pump stops until the fault clears or is reset.

What you can check

  • Check the heat pump isolator and consumer-unit breakers are on (do not open any casing).
  • Note the error number/LED pattern shown and give it to your installer.

What the engineer will check

  • Check compressor wiring, windings and inverter/IPM board.

Who to ask for: refrigeration / electrical.

Certification: Electrical competence; F-gas if compressor replacement.

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026