Heat pumps · Error codes · Advantix S.p.A
E00Advantix S.p.A
E00 on an Advantix S.p.A heat pump: Remote off
Short answer
On an Advantix S.p.A heat pump, E00 means: Remote off. The heat pump keeps running.
Reviewed 24 September 2026 · 4 sources
What it means
The manual says: Remote off.
Part involved: see manual.
Is it safe?
| Does the heat pump stop? | No |
|---|---|
| Severity | Information only |
| Engineer needed? | No |
The heat pump keeps running.
Resetting itself: unknown.
What you can check
- This is a warning that the unit has been switched off by a remote on/off input (e.g. an external controller or timer). Check your external controller/timer settings.
What the engineer will check
- Follow the manufacturer's troubleshooting for this code.
Who to ask for: Heat pump engineer.
Certification: Heat pump installer competence; F-gas and flammable-refrigerant (R32/R290) handling competence for any refrigerant-circuit work.
What you might notice
Sources
- Maxa i-290 Inverter air/water heat pumps with axial fans - Controller Manual (0106-0118) ↗ · page p.44 · Reviewed 24 September 2026
- Maxa i-32V5 Heat pump air/water inverters with axial fans - Controller Manual ↗ · page p.35 · Reviewed 24 September 2026
- Controller for i-32V5 MIDI Air/water inverter chillers and heat pumps with axial fans ↗ · page p.29 · Reviewed 24 September 2026
- Maxa i-HPV5 Chillers and Inverter Air/Water heat pumps - Controller Manual ↗ · page p.29 · Reviewed 24 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 24 September 2026