SolarpunkHomes
Sign inCall us · +44 7510 081687
Heat pumps
Heat pumps · Error codes · Panasonic
F52Panasonic · Panasonic, all models

F52 on a Panasonic heat pump: Bypass inlet sensor error

Short answer

On a Panasonic heat pump, F52 means: Bypass inlet sensor error. The manual does not say whether the heat pump stops. An engineer is needed to fix the cause.

Reviewed 23 September 2026 · 1 source

What it means

The manual says: Bypass inlet sensor error.

Part involved: Bypass inlet temperature sensor.

When it shows: Not stated in the documents opened.

Likely causes:

  • Not stated in the Panasonic documents opened (operating instructions list code and title only).

Is it safe?

Does the heat pump stop?Not stated
SeverityFault — needs a manual reset once the cause is fixed
Engineer needed?Yes

The manual does not say whether the heat pump stops.

Resetting itself: Not stated in the Panasonic documents opened; protection counters lock out after the stated number of occurrences.

Manual reset: User: 'Error Reset' in the remote-controller Quick Menu (H/J/K/L controllers) or OFF/ON; engineer must clear the underlying cause (service manuals: 'When error happens, the power has to be reset').

What you can check

  • Read and note the code shown blinking on the remote controller (also stored under System Check > Error history). Per the Panasonic operating instructions the user may switch the system OFF/ON at the remote controller and use 'Error Reset' in the Quick Menu; if the code returns, leave the system and contact the installer (UK user guide lists Panasonic technical support as the fallback).

What the engineer will check

  • Check bypass inlet sensor connector and resistance per the model service manual.

Who to ask for: Heat pump engineer (Panasonic-trained).

Certification: None statutory; safe electrical isolation competence required.

What you might notice

Sources

A code explains what the controller detected, not a confirmed root cause.

Reviewed: 23 September 2026