990 on a NIBE heat pump: Country not defined: Country not selected
Short answer
On a NIBE heat pump, 990 means: Country not defined: Country not selected. The heat pump keeps running.
Reviewed 23 September 2026 · 1 source
What it means
The manual says: Country not defined: Country not selected.
Part involved: PCB / software configuration.
When it shows: Country not selected.
Is it safe?
| Does the heat pump stop? | No |
|---|---|
| Severity | Information only |
The heat pump keeps running.
Resetting itself: yes - Only info; resets when country selected in menu 5.12.
Manual reset: Reset from the controller alarm menu ('reset alarm' / 'Reset alarm and try again'); alarm recurs if the cause remains.
What you can check
- Read the alarm text and the 'info/action' help on the controller display (VVM/SMO or S-series smartguide). NIBE's manuals let the homeowner select 'reset alarm' ('Reset alarm and try again' on S-series); if the lamp returns to normal the alarm has cleared. If it comes back, do not keep resetting: select 'aid mode' ('Auxiliary operation' on S-series) if offered, so any electric additional heat keeps heat/hot water going, and contact your installer. Note the alarm and contact your installer; no homeowner action beyond resetting.
What the engineer will check
- Check serial number/software versions, PCB type and DIP switch settings; update software or replace PCB as required.
Who to ask for: NIBE-trained heat pump installer (NIBE PRO / VIP).
Certification: None specific beyond competent heat pump installer; electrical work to BS 7671.
What you might notice
Sources
- Service manual F1255 Ground source heat pump SEM GB 1609-1 (M11932) ↗ · SEM GB 1609-1 · page 37 · Reviewed 23 September 2026
A code explains what the controller detected, not a confirmed root cause.
Reviewed: 23 September 2026